Explore Knowledge Articles
How do I find my Model Number?
Do you have the original packaging?
-
If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.
Most model numbers are 12-16 characters and start with a couple letters followed by a dash.
No packaging? No problem!
-
The product number is on a label on the side of the dimmer or switch.*
If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.
*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.
Get help your way
How do I find my Model Number?
Do you have the original packaging?
-
If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.
Most model numbers are 12-16 characters and start with a couple letters followed by a dash.
No packaging? No problem!
-
The product number is on a label on the side of the dimmer or switch.*
If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.
*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.
- Browse Components
-
If you don't know your model number, try browsing for it here
If you don't know your model number, try browsing for it here
- LED / CFL
- Incandescent / Halogen
- Magnetic Low Voltage
- Electronic Low Voltage
- Fluorescent / LED 3-Wire
- Companion
LED / CFLIncandescent / HalogenMagnetic Low VoltageElectronic Low VoltageFluorescent / LED 3-WireCompanionDimmer-FanDimmer-SwitchDimmer-TimerDimmerDual CircuitDual TechDual Tech Dual CircuitSwitch -
View support resources for the full range of Maestro designer light controls, fan controls, sensors and timers
-
#017 - Common Neutral Interaction 360283
-
#019 - Guide to Dimming Low-Voltage Lighting 362219
-
#124 - Maestro Family Advanced Programming Mode
-
#421 - Fan / Light Programming Reset Procedures
-
#435 - Using Occupancy Sensing Switch with Maestro Companion Switch
-
#440 - Maestro In-Wall Occupancy / Vacancy Sensors Installed on GFCI Protected Circuits
-
#442 - Application Note for Current Sink Only Controls
-
#453 - Advanced Programming Mode (APM) for Maestro ELV Dimmers
-
#459 - Maestro LED+ Advanced Programming Mode
-
#461 - Custom Settings for Maestro In-wall Sensors
-
#469 - Sensors and Compliance with the 2011 National Electric Code (NEC) Requirements for Neutral Conductors
-
#480 - Maestro Occupancy Sensor LED+ Dimmer Additional Programming, Installation, and Troubleshooting Help
-
#489 - Maestro Dual-Circuit Occupancy Sensing Switch Additional Programming, Installation, and Troubleshooting Help
-
#504 - Maestro Dual Tech Sensor Switch Additional Programming
-
#519 - Minimizing Radio Frequency Interface 360484
Looking for other products?
No Results Found! Please enter valid model number to search.
How do I find my Model Number?
Do you have the original packaging?
-
If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.
Most model numbers are 12-16 characters and start with a couple letters followed by a dash.
No packaging? No problem!
-
The product number is on a label on the side of the dimmer or switch.*
If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.
*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.