hero-banner-mob

Caséta Support

Looking for help? We've got you covered
Caséta Wireless Product Installation Claro Accessory Switch for Caseta

Explore Knowledge Articles

Back

Claro Accessory Switch for Caseta

A paddle accessory switch that works with the Diva Smart Dimmer and Claro Smart Switch

Claro Paddle Accessory Switch for Caséta that works with the Diva Smart Dimmer and Claro Smart Switch 
 

Documentation

KNOWLEDGE ARTICLE CONTENTS:

Section (1): Device Compatibility
Section (2): Product Installation
Section (3): Product Features
Section (4): 3-Way/Multi-Location Options
Section (5): Troubleshooting

Section (1): Device Compatibility

Only compatible in 3-way and 4-way applications with either the DVRF-6L or DVRF-5NS devices.
Not compatible with Original Smart Devices: PD-6WCL, PD-5NE, PD-10NXD, PD-6ANS, PD-5ANS, or PD-5WS-DV
Not compatible as a standalone switch. The Claro Smart Accessory Switch must be installed with the DVRF-6L or DVRF-5NS.

Section (2): Product Installation

NOTES ON INSTALLATION

  • No neutral wire required.
  • Only for 3-way or multi-location wiring, use only one Diva smart dimmer (DVRF-6L) or Claro smart
    switch (DVRF-5NS) with up to 10 accessory switches.
  • Maximum wire length between the main control and the farthest accessory switch is 150 ft (45 m).
  • If there is no ground wire in your electrical box, cap off the green wire from the accessory switch. A ground wire connection is not required for this accessory switch to function properly. A ground wire may be required by local electrical code

 

APPLICATIONWIRING DIAGRAMWALK ME THROUGH INSTALLINSTALLATION VIDEO
2 Locations (3-Way) 
 		Claro Accessory Switch DVRF-AS 3 Way Wiring Diagram IconClaro Accessory Switch DVRF-AS 3 Way Wiring Diagram IconClaro Accessory Switch DVRF-AS 3 Way Video Tutorial Icon
3 or more Locations (4-Way)  
Claro Accessory Switch DVRF-AS 3 Way Wiring Diagram IconClaro Accessory Switch DVRF-AS 3 Way Wiring Diagram IconClaro Accessory Switch DVRF-AS 3 Way Video Tutorial Icon



Section (3): Product Features
Matches the style of the Diva Smart Dimmer and Claro Smart Switch
Claro Accessory Switch does not count towards 75 device limit when used with Caséta Smart Hub
Does not have an LED indicator light

Section (4): 3-Way/Multi-Location Options

Primary Control3-Way (Wireless)3-Way (Wired)Multi-Location (Wired)
Caséta Wireless Original Smart SwitchPico Smart RemoteMechanical SwitchN/A
Caséta Wireless Original Smart DimmerPico Smart RemoteN/AN/A
Caseta Wireless Original Pro DimmerPico Smart RemoteMechanical SwitchN/A
Caséta Wireless Claro Smart SwitchPico Smart RemoteMechanical Switch or Claro Smart Accessory SwitchClaro Smart Accessory Switch
Caséta Wireless Diva Smart Dimmer SwitchPico Smart RemoteMechanical Switch or Claro Smart Accessory SwitchClaro Smart Accessory Switch


Section (5): Troubleshooting
 

SymptomsProbable Cause
The load does not turn ON or no LEDs on the
dimmer or switch turn ON.		• Front Accessible Service Switch (FASS) on the main
dimmer or switch is pulled out to the OFF position.
• Light bulb(s) burned out.
• Breaker is OFF or tripped.
• Wiring error. Refer to the wiring diagrams above or go to
www.lutron.com/wiringwizard
The load turns ON and the main dimmer or
switch works, but accessory switch does not
work.		• Wire connected to the blue wire on the main dimmer or
main switch is not the same wire connected to the blue
wire of the accessory switch.
The load does not remain ON and main
dimmer or switch LEDs glow dimly or blink.		• Blue wire is miswired to neutral wire or touching ground.


Learn More
Ready to program your device? Learn all about the available product settings of the DVRF-6L Diva Smart Dimmer